FREE SHIPPING OVER $30— Shopping Made Simple.
Showing 3401–3420 of 3579 results
Tired of setting your points, or hitting that magical point at higher RPM where they seem to float, costing you power and performance? It?s time to pull out those ancient contacts and benefit from modern day, digital technology with the FAST XR-i Replacement Module. The XR-i is a compact module that bolts directly in place…
These adapters allow a common ECU and main harness to adapt to a wide variety of ignition strategies. This HEI Ignition Adapter kit contains the harness needed to adapt the XFI 2.0 to an HEI Ignition device. Contains a pre-built harness.
QTP Low Profile QTEC Butterfly Kit
FAST? Dual-Sync Distributors are an easy, drop-in, plug-and-play solution for fully sequential high performance V8 EFI engine applications. Featuring reluctors and pick-ups that have been properly aligned right out of the box, they eliminate the need to set crankshaft reference angles or rotor phasing manually before installation. FAST? Dual-Sync Distributors also feature housings that are…
The throttle position sensor bolts to the throttle blade shaft and relays throttle opening/closing information to the system ECU. The TPS is constructed of high resistance material with a sensitive rotator for accurate throttle position measurement. Adapts early design/TPI/Weatherpack sensor to late model Metripack/GM LS series harness/EZ 2.0. T Shaped Flat Blade terminals on harness…
Add some extra Mishimoto flair to your build with the Mishimoto -6AN Push Lock Fitting. These fittings feature a push-lock end for quick and simple installation and are offered in straight, 45-, 90-, and 180-degree angles for easy integration into your system. These fittings are also silver and black anodized aluminum to keep a fresh…
The FAST? Crank Trigger is a magnet free device with a durable wheel constructed from high strength steel. With a .125″ wheel, it requries less space than compmetitors’ aluminum versions. With the wheel being this thin, it not only weighs less but requires less space than competitors? aluminum versions. The FAST? inductive sensor is also…
BorgWarner Gasket Turbine Inlet EFR T4
The LSXrt Intake + Big Mouth 102mm Throttle Body Kit increases horsepower and throttle response thanks to improved manifold flow and a 102mm throttle body bore. Billet throttle blade decreases deflection, polymer manifold reduces heatsoak. Available for LS1/LS2/LS6 car applications under 146302B-KIT. Available for LS3/L92 car applications under 146102B-KIT. Available for LS7 applications under 146202B-KIT.
This system is for vehicles that come from the factory with single tips are not equipped with NPP (dual mode exhaust). This system is for vehicles that come from the factory with single tips and are NOT equipped with NPP (dual mode exhaust). Borla Cat-Back And Axle-Back multi-core technology to unleash hidden horsepower. Increased exhaust…
QTP 15-18 Dodge Challenger 6.2L/6.4L 304SS Screamer Exhaust 3in Quad Tip Adapter w/Black Tips
The Bosch LSU4 Oxygen Sensor is widely used in the FAST product line. Finding its way into the FAST EZ-EFI Fuel, EZ-EFI Fuel + Igniton as well as the XFI Sportsman and even the FAST Air/Fuel Meters, the LSU4 is accurate, durable and essential to the operation of a number of FAST products. This Bosch…
Introducing the 2003-2007 Dodge Ram 5.9L Cummins silicone air intake hose kit from Mishimoto! This replacement for the factory Cummins turbo air duct replaces your overly-restrictive corrugated plastic hose with a smooth, free-flowing silicone tube that improves airflow and durability. The Mishimoto intake tube eliminates the ribbed stock piping, reducing turbulence into the turbo and…
FAST? Precision-Flow? Fuel Injectors deliver the outstanding idle quality, unparalleled flow consistency and durability essential for high performance EFI engine applications. Engineered to yield faster throttle response, reduced clogging and superior fuel atomization, Precision-Flow? Fuel Injectors are manufactured to the tightest tolerances in the industry. FAST? also offers Precision-Flow? Fuel Injectors specifically for GM Gen…
The patented LSX 92mm Black Intake Manifold from FAST is the only three-piece Gen III (cathedral port) composite manifold proven to deliver increased performance without compromising bottom-end drivability or high RPM power. For both street and racing applications, the new black intake manifold is an easy bolt-on installation for GM Gen III (LS1, -2, and…
The XR-1A High-Output Ignition Coil Set is designed specifically for high-compression naturally aspirated, boosted or nitrous-equipped applications making more than 1,000 horsepower, far beyond the capabilities of OEM coils. The spark energy of these coils is comparable to CDI (capacitive discharge ignition) systems without the need to convert. The Smart Coil design also requires no…
Available Individually under 30394-1. 2011-2015 Ford 5.0L Coyote Fitment 2011 Ford F-150 FX2 2011 Ford F-150 FX4 2011 Ford F-150 King Ranch 2011 Ford F-150 Lariat 2011 Ford F-150 Platinum 2011 Ford F-150 STX 2011 Ford F-150 XL 2011 Ford F-150 XLT 2011 Ford Mustang GT 2012 Ford F-150 FX2 2012 Ford F-150 FX4 2012…
Unleash your 2021+ 2.3L EcoBoost Ford Broncos full potential with the Mishimoto High-Mount Intercooler Kit! Designed to allow your Bronco to breathe the coldest, densest air possible, this high-mount intercooler kit is comprised of our high-mount intercooler and performance intercooler pipe kit.—-Weve relocated the intercooler to the upper grille to allow better airflow at all…
FAST Throttle Position Sensor for GM LS applications bolts to the throttle blade shaft and relays throttle opening/closing information to the ECU. The TPS is constructed of high resistance material with a sensitive rotator for accurate throttle position measurement. This throttle position sensor is the same as a GM LS design TPS. This TPS features…
The patented LSX 92mm Black Intake Manifold from FAST is the only three-piece Gen This lower shell replaces the lower shell that came with the LSX 92mm intake manifold. See 54039BUS for upper shell. Fitment 1999 Chevrolet Silverado 1500 Base 1999 Chevrolet Silverado 1500 LS 1999 Chevrolet Silverado 1500 LT 1999 Chevrolet Silverado 2500 Base…
ORBITAL-D 26X8.25 8X165.1 ET 145 CB 121.4 GLOSS BLACK MILLED
1 × $70.00 
Yukon Bearing Install Kit for 05-10 Jeep WK Grand Cherokee XK Coman 8in IFS Front
2 × $13.20 Weld S71 17x5 / 5x4.75 BP / 2.2in. BS Polished Wheel (High Pad)
2 × $70.98 Subtotal: $238.36